DOWNLOAD TECNO H5 CLONE SPD 8810 6820 FIRMWARE

Learn how to flash/unbrick this device from here
Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact Firmware of the device you want to flash because
flashing a wrong Firmware, will make the device completely dead
(cant power on, cant charge and will not be detected by a computer)
Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact Firmware of the device you want to flash because
flashing a wrong Firmware, will make the device completely dead
(cant power on, cant charge and will not be detected by a computer)
TECNO H5 CLONE SPD 8810/6820 FIRMWARE
Firmware Info
CPU type: 8810/6820
Flash type: NAND
Flash ID: 00AD00BC
Flash Model: HYNIX H8BCS0UN0MCR
Flash Size: 0x21000000(528.0M)
Variant 1
Firmware Info
CPU type: 8810/6820
Flash type: NAND
Flash ID: 00AD00BC
Flash Model: HYNIX H8BCS0UN0MCR
Flash Size: 0x21000000(528.0M)
Variant 1
DOWNLOAD FIRMWARE
Variant 2
Variant 2
DOWNLOAD FIRMWARE
Note!
This Firmware is for Clone TECNO H5
Fake, Imitation, not Original.
Fake, Imitation, not Original.
Please leave a comment after using this Firmware
Report if you cannot download this file.
Report if you cannot download this file.
download file now