Hard Disk Sentinel Pro 4.40.10 Full Version + Patch

Hard Disk Sentinel Pro 4 40 10 Free Download

Hard Disk Sentinel Pro 4.40.10 Full Version + Patch

Description

Hard Disk Sentinel - a utility for monitoring and control of hard disk drives. Allows you to identify potential problems, performance degradations and failures. Can alert the user in the event of faults or excessive temperature. Its potential is clearly not seem superfluous, especially in the case of special value stored data while increasing the volume of storage. The program monitors the status of hard drives, including indicators of temperature and parameters of SMART (Self-Monitoring, Analysis and Reporting Technology, a technology built into most modern drives) for each hard disk.

The program monitors the status of hard drives, including indicators of temperature and parameters of SMART (Self-Monitoring, Analysis and Reporting Technology, a technology built into most modern drives) for each hard disk. Also measures the speed of data transmission in real mode (the indicator can be used for testing or determining the occurrence of low productivity in certain situations). Runs in the background and constantly analyzes the situation. In the event of an error or exceed the threshold of certain parameters specified by the user, a warning. In most cases, comes to the aid technology of SMART, as it is one of the fastest and easiest ways to track changes in critical or critical parameters of the drives.

Hard Disk Sentinel can be used to prevent serious damage or data loss. The program warns the user if a problem before it happens and make it possible to backup important and valuable data. Hard Disk Sentinel runs in the background and constantly analyzes the state of the hard drive. If there is an error or unexpected behavior is detected, the program warns the user about the current state. Usually, the hard disk may slowly deteriorate day by day. SMART-technology helps to predict the possible failure by controlling the critical values ??of the disk. The program also displays the current temperature of the hard disk and stores the previous temperature, which can be used to test the maximum temperature under load HDD.

Improvements and New Features:

displaying health (actual and original) during Disk -> Surface test functions

improved display of S.M.A.R.T. attribute changes: automatically showing more dates based on screen resolution

double click on S.M.A.R.T. attribute graphs to toggle showing all measured values

right click on S.M.A.R.T. attribute graph to export all displayed values

improved hardware self tests (Short self test, Extended self test) on various internal and external drives (previously reported "Interrupted with hardware/software reset" caused by special power management implementations)

improved report of hard disk status and attributes for SCSI / SAS hard disks

improved re-adjust Automatic Acoustic Management / Advanced Power Management levels on startup when required

improved "sending files in e-mail" project

Windows 8.1 (preview) OS support

log data communication errors

added Slovak language support (thanks to Lukas Surin for translation)

Improved hardware support:

added support of Seagate External hard disks, newer Seagate USB hard disks, FreeCom external hard disks

added support of Adaptec 7xxx series RAID controllers in RAID mode: detection of complete hard disk status when SATA or SAS hard disks configured as RAID arrays.

added support of Adaptec 2200S, 2120S, 2130S, 2230S SCSI controllers in RAID mode: detection of complete hard disk status when SCSI hard disks configured as RAID arrays.

added support of PROMISE SuperTrak RAID controllers in RAID mode: detection of complete hard disk status when SATA hard disks configured as RAID arrays.

added support of PROMISE FastTrak RAID controllers in RAID mode: detection of hard disks in the arrays and their general S.M.A.R.T. status

added support of PROMISE enclosure information: displaying fan speed, temperature and voltage provided by the Promise enclosure

added support of IBM M1115, SuperMicro SMC2108 RAID controller: detection of complete hard disk status when SATA hard disks configured as RAID arrays.

added support of HighPoint RS5122B USB docking station

added support of HighPoint Datacenter DC7280 controller

general improvements for external USB 3.0 multi-drive enclosures

improved support for Win XP 64 bit & different RAID controllers (Gigabyte, VIA, JMicron, etc.)

improved support of JMicron USB 3.0 / eSATA RAID enclosures

improved support of LSI, Intel SAS/SATA RAID controllers, displaying hot spare and unconfigured drive(s)

improved support of HighPoint, Areca, LSI RAID controllers

improved support of various hard disks (high capacity, 2-3-4 TB models) and newer SSD models (ADATA, OCZ, Samsung, Plextor, etc)

improved compatibility for various card readers, pendrives

improved detection of standalone (non-RAID) hard disks with HighPoint and Areca controllers

improved support and compatibility for newer Intel RST drivers (12.x versions)

Bug fixes, further modifications:

fixed: service mode startup problems on some non-English Windows systems

fixed: previous versions may displayed error at startup if WMI libraries damaged / corrupted

fixed: webStatus displayed partial information if Intel SSD used in the system

fixed: disk-specific settings were not saved for some Intel SSD models

fixed: startup may failed when Acronis software used to split 2+ TB hard disks

fixed: Portable version startup after uninstallation of license from the actual system

fixed: custom icon set setting may reset after standby

In addition, access to a large number of additional options to customize a personal need, for advanced control of warnings, maintaining the logging of the data collected, the synchronization of the system time via the Internet, automatic shutdown and management of the acoustic mode (in the case of support for this feature in drives).

OS: Windows XP / Vista / 7 / 8 / 8.1

Language: Eng

Medicine: Patch

Size: 17,83 Mb.

Screenshot :

download file now