How to Fix a Deadboot and Hardbrick Cherry Mobile Flare Lite

How to Fix a Deadboot and Hardbrick Cherry Mobile Flare Lite

How to Fix a Deadboot and Hardbrick

Cherry Mobile Flare Lite

Requirements

• SP Flash Tool
• MTK Drivers
• MTK Droid Tools
• Computer
• Backup Rom (Not Flashable)
• Common Sense
• Brain please

Note

• Also applicable for those Unrooted Phones with MTK Chipsets..
• Install first the Drivers.
• If you already have a Flashable ROM, proceed to Part B.

Instructions

Part A. (Creating flashable rom via MTK Droid Tools)

1. Download and extract the files
2. Install MTK drivers
3. Open MTK Droid Tools(Run as Administrator)
4. Click Scatter from file
5. Then find the folder where you place your nandroid backup
6. Click firmware.info then open then rename mo yung text File ng MT6572_Android_Scatter
7. Click "Yes" when a dialog appear.
8. Go back to MTK Droid Tools and Click root,back,recovery (Beside Phone Information)
9. Then click "To prepare blocks for FlashTool"
10. Locate again the folder where you place your nandroid backup
11. Click "file" and open it and wait until MTK Droid Tools is Done
12. Your Flashable rom is inside the folder of your nandroid backup with the folder name "!Files_to_Flashtool"

Part B. (Flashing Rom via SP Flash Tool)

1. Install MTK Drivers first(For user who downloaded the flashable rom in this group)
2. Extract all required tools that are zipped (For user who downloaded the Flashable ROM in this group)
3. Open SP Flash Tool(Run as Administrator)
4. Click Scatter-Loading
5. Find the folder of your flashable rom and open it(!Files_to_Flashtool folder)
6. Click MT6572_Android_Scatter and open it
7. Select Format all + Download
8. Wait until loading is finished then click download
9. Turn off your phone and pull off the battery
10. Connect the phone without battery to pc
11. If the loading bar turns red it means SP Flash Tool detects your phone
12. Then put the battery to your phone
13. If the loading bar turns yellow it means SP Flash Tool is flashing your recovery
14. Wait until flashing is done
15. When the flashing process is finish, Disconnect your phone from pc

Part C. (Preparing for Resurrection XD )

1. Put off the battery and put it on again
2. Then hold Volume up(+) button and power button
3. Then select recovery mode 
4. Select Wipe Data and Factory reset, Click yes
5. Select Wipe Cache Partition, Click yes
6. Reboot and Done! Buhay na si phone mo 

Credits

• Josiah Tingzon
• Cherry Mobile Flare Lite (Quick Response Team)

download file now